MAF sensor clean save 20% to 60%

Get quotes for your RAM 3500 from independent specialists near you.

usp australia

Australia's #1 booking site for car services & repairs

usp heart

Book now, pay later Interest-free payments

usp transparent fees

Transparent prices no surprises

bnpl banners

*Available at select service providers. T&Cs apply.

RAM 3500 MAF sensor clean

What's involved in a RAM 3500 MAF sensor clean?

A mass airflow sensor (MAF sensor) is an important device used on fuel injected RAM 3500’s. It’s a sensor that reads the air volume entering the engine. The MAF sensor sends data to the RAM 3500’s ECU so it can calculate how much fuel to deliver, making sure the correct air-fuel mixture is maintained for best combustion.

As you can imagine, when the MAF sensor gets dirty it usually shows signs that it needs to be cleaned, however, sometimes the problem isn’t always obvious, so a scan tool check is a great way to isolate a MAF sensor issue on a RAM 3500.

A qualified mechanic is trained in how to clean a RAM 3500 MAF sensor and is recommended to do this job. The mechanic will locate the MAF sensor, unscrew/unclip it and remove it. They will apply a mass airflow sensor cleaner to the sensor, let it sit and then refit into place.

MAF sensors are fragile as they have delicate wires that can be easily damaged. If they break the RAM 3500 MAF sensor it will need to be replaced. Using the correct cleaner is also important so the dirt is removed without causing any damage to the sensor.

Common {{make}} {{model}} Repairs