Jeep Cherokee Horn replacement

How much does a Jeep Cherokee horn replacement cost?

The Jeep Cherokee’s horn is a warning device which, by law, is only allowed to be used to warn other road users or animals of the Jeep Cherokee’s approach and possible imminent danger. It can be used in conjunction with an anti-theft device or alcohol ignition interlock. A road vehicle must be equipped with a functioning horn and it should not be used for anything other than its purpose, otherwise you could be fined.

The horn activation point, or switch, is on the Jeep Cherokee’s steering wheel. Since it is a warning device to be used in an emergency situation only it is within easy reach and its very quick to activate. It only takes a second to strike the steering wheel. The actual warning sound comes from the front of the Jeep Cherokee, which is where the horn is found.

When the horn switch is pressed in the cabin it activates a relay which allows power to flow to the horn. On modern Jeep Cherokee’s it generates a beep sound as the warning. There will be at least one horn per vehicle although some Jeep Cherokee’s have two horns that emit different frequencies, or notes, as this is more obvious in a noisy environment. The exterior of a horn can be small enough to fit in the palm of the hand and is usually made of plastic and/or metal. A horn will produce around 109-112 decibels of sound.

A plunger’s rapid back and forth movement flexes and vibrates the diaphragm, creating the sound you hear when pressing the Jeep Cherokee’s horn switch on the steering wheel.

A working warning device on a Jeep Cherokee is a requirement. You never know when it may be needed - you might need to shoo some cows off the road on your next country drive. If your horn is sounding hoarse then best get it replaced as soon as possible.