EGR valve replacement save 20% to 60%
Get quotes for your MG GS from independent specialists near you.
Australia's #1 booking site for car services & repairs
Book now, pay later
Transparent prices no surprises
*Available at select suppliers. T&Cs apply.
EGR valve replacement
MG GS EGR valve replacement
The Exhaust Gas Recirculation (EGR) valve recirculates a portion of the exhaust gas that would normally go through your MG GS’s exhaust system and mixes it in with the fresh air inside the intake manifold. These gases are then burned off as they pass back through the combustion process.
Reducing the volume of emissions going through an exhaust system lengthens the life of a catalytic converter and helps the environment, and most modern vehicles have either an external or internal EGR valve. If your MG GS doesn’t have an external EGR valve it will most likely have an internal EGR.
An EGR valve can fail when it loses vacuum, the diaphragm is perforated, it is full of gunk or the valve gets stuck open. When this happens the EGR valve will need to be replaced. On electric EGR valves, there could be an issue with the wiring.
When the EGR valve fails, the MG GS’s check engine warning light will usually illuminate on the dash and the vehicle may run rough. The engine may run lean, or rich, depending on why the valve has failed.