Land Rover Boot lock assembly replacement
Get quotes for your Land Rover from specialists near you
Australia's #1 booking site for car services & car repairs
Book now, pay later Interest-free payments
Transparent prices no surprises
*Available at select service providers. T&Cs apply.
Land Rover Boot lock assembly replacement
Does My Land Rover Boot/Tailgate Lock Assembly Need to Be Replaced?
Your Land Rover boot/tailgate lock assembly is the mechanism that allows you to lock, unlock and open your boot. It can be actuated with a key lock, a remote button/lever inside the car or as part of the central locking system on the key.
When your Land Rover boot/tailgate lock fails it will need to be opened manually and the interior trim removed from the tailgate or boot lid. Then the boot lock assembly can usually be accessed. If it needs to be replaced it will be unplugged or disconnected from a cable (or both) and from there it can be unbolted, removed and replaced.
Land Rover boot/tailgate locks can fail due to the actuator malfunctioning, it is usually more cost and time effective to replace the actuator over repairing it. Or, if you use a key and not a remote trigger to access the boot or tailgate, sometimes the lock cylinder becomes faulty and isn't triggering the latch when you turn the key.
The easiest way to get your Land Rover boot or tailgate lock replaced is to book it in with one of the experienced mechanics on AutoGuru to take the hard work out of it and make the process as easy as possible.
Land Rover Models
- Land Rover 110
- Land Rover 90
- Land Rover Defender
- Land Rover Discovery
- Land Rover Discovery 3
- Land Rover Discovery 4/Discovery
- Land Rover Discovery II
- Land Rover Discovery Sport
- Land Rover Freelander
- Land Rover Freelander 2
- Land Rover Range Rover
- Land Rover Range Rover Evoque
- Land Rover Range Rover Evoque Convertible
- Land Rover Range Rover Sport
- Land Rover Range Rover Velar
- Land Rover Range Rover/Classic
- Land Rover Series III
